Lawn Care Company Australia
Company
AboutContactWholesaleTrack Your Parcel
Shop By Category
Lawn MowersLawn Aerators & RollersLawn Levelling & RakesFeeding, Seeding & Weed ControlGarden EdgingRaised Beds, Growing & CompostingWatering & IrrigationFire Pits & Outdoor LivingGarden Structures & ScreeningGarden ToolsGardening AccessoriesView all products
T&Cs
Terms & ConditionsShippingRefunds & ReturnsPrivacy PolicyLimited Liability IndemnityDisclaimerCookie Policy
Shop Online
  • Free delivery on orders of $90 or more
  • Secure card and PayPal payments
  • Delivery across Australia
  • 15 days from delivery to change your mind

Stainless Steel Garden Edging | Stainless Steel Lawn Edging | 50mm Metal Garden Edge

Order 50mm stainless steel garden edging by the metre, in stock now

$39 per metre $46.80 Save $7.80 per metre

$39 per metre · GST included

Standard delivery $27.50, free on orders of $90 or more

  • 50mm face height, the lowest of the three
  • 1m sections that slot together end to end
  • Bends by hand for curves, beds and paths
  • Sold by the metre, with garden and trade packs

Face height: 50mm

50mm $39 per m 100mm $44 per m 200mm $49 per m
Length

Your order: 1 m by the metre, $39 including GST

  • Standard delivery: free on orders of $90 or more, otherwise $27.50. Allow up to 7 working days by tracked courier, after dispatch within 2 working days.
  • Express delivery: $27.50 on any order, chosen in the cart. Allow 3 to 5 working days by tracked courier, after dispatch within 1 working day.
  • Pay by card or PayPal, handled by the payment provider. Prices include GST.
  • 15-day change-of-mind returns and exchanges. Conditions and return postage apply. Australian Consumer Law rights are unaffected. Full returns policy

What is included

  • 50mm stainless steel edging in 1m sections, one section for each metre you order
  • Three steel fixing spikes (100mm long) for each metre

Not included: hammer, gloves and cutting tools.

Specifications

Face height50mm
Section length1m (100cm)
Thickness0.5mm
MaterialStainless steel
SoldBy the metre, or in 10m and 30m packs

Need a detail that is not listed here, like weight? Ask us before you order and we will check it.

Optional installation extras

Not included and not needed to install the edging. Nothing here is added unless you press its Add button.

Steel Edging Spikes: 50 Pack Spare spikes for tight curves or soft ground, on top of the ones that come with the edging. $49
Steel Edger Lawn Tool Half-moon blade for cutting a clean line in the turf before the edging goes in. $99
Shipping & returns

Tracked delivery throughout Australia. It is free on orders of $90 or more, and $27.50 below that. Prices include GST. Any product-specific lead time is shown on this page or confirmed after the order.

Changed your mind? This shop gives you 15 days from delivery to send a standard stock item back in its original packaging for an exchange or a refund. Contact us with the order number first. There is no cancellation, restocking, service, packing or handling fee; you cover the return postage.

If it arrives faulty, damaged, incomplete or simply not what you ordered, we arrange the return at our cost and put it right. Your consumer guarantees under the Australian Consumer Law are separate from the change-of-mind return above and are not affected.

Shipping details · Refunds and returns

A closer look

What you get, and how it goes in

A low 50mm stainless steel edge in 1m sections that slot together, for lawn edges, garden beds and paths.

This is the low one. A 50mm face gives you a thin, clean line between lawn and garden bed without a tall wall of steel on show.

It comes in 1m sections that slot into each other, so you order the length you need and keep joining. It bends by hand around curves, and three spikes per metre pin it through the base tabs. No trench to dig.

Order 1 to 9 metres by the metre, or save per metre with a 10m or 30m pack. The photos below show how it joins, fixes down and looks once it is in.

Installed on a curve The edging follows a curved lawn edge. The folded tabs sit flat on the soil, and a spike goes through the hole in a tab to pin it down.
Curves and S-bends An illustration of one long run shaped into an S-bend across a lawn, with spikes holding the line.
Sizes and fittings Our size diagram for the three face heights. The 50mm option is at the front: a 50mm face on a 50mm base of fixing tabs, in 1m sections. It also notes the 0.5mm steel and the three 100mm spikes per metre.
How sections join Two sections joined end to end. A tab on one section slots into the next. The inset shows the join enlarged.
In the ground Three installed runs around lawn and garden beds. You can see the row of fixing tabs on the bed side before they are covered. Photos show the stainless range, so the face here may differ from the 50mm option.
Along a path A finished run between paving and a pebble bed, with the tabs buried. Photos show the stainless range, so the face here may differ from the 50mm option.
Fixing it down A spike being hammered through a tab into the soil. A standard hammer does the job.

Got questions?

Frequently Asked Questions

What do I get when I order one metre?

One 1m section of 50mm stainless steel edging and three steel fixing spikes. Order 5 metres and you get five sections and their spikes.

How high is the 50mm edge once it is in?

The face is 50mm high. That is the lowest of our three stainless options. The others are 100mm and 200mm.

How long is each section?

Each section is 1m long (100cm). Sections join end to end, so you can make a run as long as you like.

How do the sections join?

A tab on the end of one section slots into the next one. There is a close-up photo of the join on this page.

How thick is the steel?

The steel is 0.5mm thick. That is thin enough to bend by hand around a curve.

Can I use it on curves?

Yes. You bend and shape it by hand to follow the line you want, then pin it with the spikes.

Do I need to dig a trench?

No. The edging sits on its base tabs and is pinned through them, so there is no groove to dig. Clear the line first so the tabs sit flat.

How do I fix it down?

Hammer a spike through the hole in a base tab and into the ground. Three spikes come with each metre.

What if I need more spikes?

Tight curves and soft ground can take a few more. Extra steel edging spikes are sold separately and are listed on this page as an optional extra.

Can I cut a section shorter?

Yes. Measure the length you need and cut the section to size with a hand saw. Wear gloves, because cut steel edges are sharp.

Which face height should I pick?

Pick 50mm when you want the lowest, most discreet line. Pick 100mm or 200mm when you want more of the face showing above the ground.

How much should I order?

Measure the run in metres and round up to the next whole metre. Each metre is one section. For 10 metres or more, a pack costs less per metre.

What do the packs cost?

By the metre it is $39 per metre, for 1 to 9 metres. The 10m Small Garden Pack is $360, which is $36 per metre. The 30m Trade Pack is $990, which is $33 per metre.

Is a pack different edging?

No. A pack is the same 50mm edging in the same 1m sections. You just pay less per metre.

I need 14 metres. What is the best way to order?

Add one 10m pack, then add 4 metres by the metre. The cart keeps them as two lines.

Do the prices include GST?

Yes. Every price on this site is in Australian dollars and includes GST. So does the delivery fee when there is one.

What does delivery cost?

Standard delivery is free on orders of $90 or more. Under $90 it is $27.50. Three metres of this edging is enough for free delivery.

How long does delivery take?

We dispatch within 2 working days. Standard delivery then takes up to 7 working days by tracked courier.

Is there a faster option?

Yes. Express delivery is $27.50 on any order. We dispatch within 1 working day, then it takes 3 to 5 working days. You choose it in the cart.

Do you deliver to PO Boxes?

No. Orders go by courier, so we need a street address.

Where do you deliver?

Across Australia. Remote and regional addresses can take a little longer.

Can I return it if I change my mind?

Yes. You have 15 days from delivery to send standard stock back in its original packaging for an exchange or a refund. Email us with your order number first. You pay the return postage.

What if it arrives damaged or something is missing?

Tell us straight away with your order number and a photo. We put it right at no cost to you. Your rights under the Australian Consumer Law are not affected.

How can I pay?

By card or PayPal at checkout. The payment provider handles your card details. We never see or store them.

Is it in stock?

Yes. This edging is a stock item and ships from our warehouse.

Is this edging stainless steel all the way through?

Yes. It is listed as 304 stainless steel, which is why it suits outdoor use in sun, frost and rain.

Can I use it around pavers and paths?

Yes. It works along paths, patios, driveways and garden beds, as well as lawn edges.

What tools do I need?

A hammer for the spikes, a tape measure, and gloves. Add a hand saw if you need to cut a section. A half-moon edger helps you cut a clean line in the turf first.

Do you sell to landscapers and trade buyers?

Yes. The 30m Trade Pack is the best rate on this page. For bigger jobs, use the wholesale page and tell us the length you need.

Can I ask a question before I order?

Yes. Use the contact page and tell us what you want checked. If a detail is not listed here, we will check it for you and not guess.

The complete guide

50mm stainless steel garden edge buying guide

3 min read Lawn Care Company Australia

Stainless steel edging gives a lawn, bed or path a thin, clean line that plastic edging cannot match. This guide covers the 50mm option: who it suits, how much to order, what turns up, and how it goes in.

Is 50mm the right height for you?

The 50mm face is the lowest of the three we stock. It suits a neat line between lawn and a garden bed, or along a path, where you want as little steel on show as possible.

  • 50mm: the lowest face, for the most discreet line.
  • 100mm: the middle height.
  • 200mm: the tallest face, with the most steel on show.

All three use the same 1m sections, the same join and the same spikes. You can switch height with the buttons at the top of this page.

Specifications

  • Sections are 1000mm (1m) long and join end to end.
  • Three face heights: 50mm, 100mm or 200mm. This page is the 50mm.
  • Thickness (gauge) is 0.5mm.
  • Steel spikes are 100mm long, three per metre.
  • Listed as 304 stainless steel.

How much to order

There is no minimum. Measure your run in metres and round up to the next whole metre. Each metre you order is one 1m section.

  • 1 to 9 metres: order by the metre at $39 per metre.
  • 10m Small Garden Pack: $360, which is $36 per metre.
  • 30m Trade Pack: $990, which is $33 per metre.

A pack is the same edging at a lower price per metre. For an in-between length, add a pack and then the extra metres. All prices include GST.

What arrives

You get one 1m section for each metre, plus three steel spikes per metre to pin it down. You supply the hammer, gloves and a saw if you plan to cut a section.

How the sections connect

A tab on the end of one section slots into the next. Keep adding sections until the run is as long as you need. The connector photo near the top of this page shows the join up close.

How to install it

  1. Mark your line and clear it so the base tabs can sit flat. There is no trench to dig.
  2. Lay the first section with the tabs on the garden bed side.
  3. Bend it by hand to follow your curve.
  4. Hammer a spike through the hole in a tab and into the ground.
  5. Slot in the next section and keep going.
  6. Cover the tabs with soil, mulch or pebbles for a clean finish.

Cutting and shaping

The sections bend to wrap around lawns, flower beds and trees. To finish a run, measure the last piece and cut it to size with a hand saw. Cut steel is sharp, so wear gloves.

Built for the weather

The edging is listed as 304 stainless steel, a grade chosen for outdoor use because it resists rust and corrosion. It is made to cope with sun, frost, mud and rain.

Other edging styles

Not sure stainless is your look? We also stock corten steel edging, black metal edging and flexible garden edging.

Browse the shop

Get the lawn you want

Mowers, aerators, edging, raised beds and garden tools, with free tracked delivery throughout Australia on orders of $90 or more.

Ask us a question